Rosslare AC-G43 Instruction Manual download pdf (Page 17)

Operation

AC-F4x and AC-G4x Family Manual Page 16

3.2.2 Secure User

A secure user must have a primary and secondary code assigned,

and the two codes must not be the same. The secure user can

gain access in any mode of operation. In normal mode the

secure user must use the primary code to gain entry. In secure

mode, the secure user must first enter the primary and then the

secondary code, in order to gain entry.

3.2.3 Master User

A master user must have identical primary and secondary codes

assigned. The codes are entered with the same proximity card or

the same PIN. The master user can gain access during any mode

of operation by entering their code only once.

3.3 SWITCHING OPERATIONAL MODES

The three modes of operation defined above, can be changed

with a few simple steps.

3.3.1 From Normal to Secure Mode

The default factory setting for the normal / secure code is 3838.

1) Enter the normal / secure code

• Mode indicator will flash red

2) Depress the # key to confirm the Mode

change.

• Mode indicator is red.

The auxiliary input of the controller can also be used to switch the

mode of operation from secure to normal and vice versa, if the

auxiliary input is selected it de-activates the Norma/Secure mode

code. Refer to Setting the Auxiliary Mode, paragraph

4.8.

Mode

Door

Red

Mode

Door

Green

Mode

Door

Red

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

No comments

Rosslare AC-G43 Instruction Manual Page 17